Undercoating and Rust-proofing

Rust Prevention; Water Proofing; Stops up Leaks; Sound Insulating; Collision Protection; Patching

FEATURES

High-tech polymer materials for corrosion prevention, rust proof, sound insulation and collision proof for your automobile and household products.

APPLICATIONS

Automobile: can be used on vehicle chassis, rocker panels, fender sections, hoods, and frames etc.  to protect it from rust, moisture, scuffing, and to block noise.

House: can be used on minor roof repairs and foundations, gutters and downspouts to drive away cracks.

DIRECTIONS

Use under normal temperature.

Shake can for at least 45 seconds after rattle of agitator balls is heard. Evenly spray the undercoat on the chassis or other surfaces at a distance of about 30cm after the surfaces are cleaned.

Clean valve after using by turning can upside down and press spray button for at least two seconds.

CAUTIONS

Contains mineral spirits, may cause fire where there is sparks nearby.

Use in well ventilated area. Keep away from heat sources, flame, and electrical or electronic appliances.

It may cause hormesis to human body if too much exposure to the gas that released from the can or if there is any swallow of the substance by mistake.

If any accidental contact happens, rinse with plenty of water and get medical attention immediately if in a worse condition.

Cans filled with pressured LPG, don't puncture, avoid heat source, direct sunlight or high temperature.

Application should carried on under 40°C to avoid any possibility of explosion.

Keep out of reach of children.

Undercoating and Rust-proofing